LED Strip RGB 24-key Remote Controller Light USB LED Light Bar TV Backlight Lamp String Waterproof 2835 5050 Lighting

The product is powered by a DC5V USB device or mobile phone charger/adapter (5V)
Double-sided tape self-adhesive back
Product features:
1. Excellent color: different fixed colors and RGB can be provided, and the color change is fantastic
2. Super bright: all light is diffused and completely smooth, and the light is very uniform
3. Easy to install: each LED can be cut and extended. You can cut the length according to your needs. Good flexibility, easy installation, and can be bent at will.
4. High quality: low power consumption. Long life 50,000 hours
5. Energy saving: low heat consumption, no ultraviolet or infrared radiation
specification:
Voltage: DC5V
Power: USB interface
Luminous color: RGB (red, green, blue), 5050 RGB color can be changed to monochrome red, green, blue or mixed with remote control
Length: 3 meters
Controller: 24-key infrared remote controller
Average life: 50000 hours
Easy installation:
1. Cuttable: Cut to the required length on the cutting mark on the strip.
2. Peeling: Remove the adhesive on the strip.
3. Firmly press down on the strip where needed and connect the USB to the USB port.
Application: home decoration, living room, suitable for hotels, clubs, discos, streets, parks, bars, decoration companies, stairs, ceilings, TV lights, KTV, computer lights
Package included:
1 x led light strip
1 x 24 key controller
After receiving the light bar, the light does not turn on and it can't work normally?
——It is necessary to check whether the plug of the light bar is installed upside down, if it is installed upside down, it will not work properly
Use the remote control to adjust the color, the light color has not changed?
——You need to check whether the plastic sheet in the battery compartment of the remote control has been torn off. Need to remove the battery to supply power normally
If the plastic sheet of the battery compartment is torn off, there is still no response when pressing the remote control button?
——Need to check whether the remote control is aimed at the infrared receiver, it needs to be aimed to work normally